This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. {{ :logo_guidebook1.jpg?400 |}} \\ =====LESSON 2: Opening and Saving maps on Dinamica EGO===== \\ \\ ==In this lesson we would like to demonstrate how load a map from a file and save a map into a file on Dinamica EGO.== \\ \\ **Which Functors will you use in this lesson?**\\ \\ • Functors: Load Map and Save Map\\ \\ \\ **Here, we will use**: The air_temperature raster layer (Dinamica EGO\Guidebook Dinamica_4\Database\Climate_bh\air_temperature.tif) \\ \\ There are two ways to load a raster file into Dinamica EGO. The first one is through the functor “Load map”. So, click on the Input/output tab from the library window and grab a “Load Map” and place it on the sketch. \\ \\ {{ :imagem17.png?200 |}} \\ Double click the Load Map Functor and browse to the folder Dinamica EGO\Guidebook Dinamica_4\Database\Climate_bh\ select the air_temperature.tiff file. Click OPEN and then OK and your map is loaded.